Fix Belkin Router Keeps Disconnecting Issue

Belkin routers are known to have some issues with Windows 10. Some users have reported that the connection on their Belkin router keeps dropping frequently, even after changing settings and rebooting it back multiple times. If you are using a Belkin router on your network, here is how you can keep the connection alive.

Fix Belkin Router Keeps Disconnecting Issue on Windows

This might seem like a small issue, but it sure can be frustrating. Moreover, if you are using IPTV, Sky or any other streaming service on your network which requires continuous uninterrupted connection to work properly, this behavior will make the services unusable. So, here are a few ways you can solve this issue.

First Method: Reboot Router

This is the first thing you should try if your router or modem keeps dropping out of the network or losing connection. If it is not having any hardware issues, then, most likely the problem is that your modem or router has lost its internet connection and all you need to do is reboot it.

Second Method: Upgrade Router Firmware

Belkin routers have a habit of dropping out from time to time. Sometimes they may start showing poor network connectivity or even lose connection with the modem. Another common problem in Belkin routers is that they tend to lose configuration periodically after a restart. All of these are firmware related issues which can be solved by upgrading them.

Third Method: Disable QoS

QoS or Quality of Services is a feature provided by some routers, especially Belkin ones. This feature basically identifies high bandwidth traffic which requires low amount of latency and prioritize it so that your network never lags due to any reason. However, this might turn out to be problematic if you are using the internet for normal activities such as browsing. So, if you are noticing issues with your Belkin router not staying connected for a longer period of time, you might want to disable this feature and see if that solves the problem.

Fourth Method: Change MTU Size

MTU or Maximum Transmission Unit is the size of a packet of data sent on a network. Depending upon your ISP and type of internet, you might have to change MTU settings from time to time if you notice that some pages or sites are not opening or loading properly. It can also happen that some routers simply do not support changing settings automatically while others do and hence, if changing the MTU size does not solve the problem for you, you need to check with your ISP and see what they recommend for your internet connection.

Fifth Method: Get a New Network Adapter

If none of the above methods seem to be helpful and you keep facing disconnect issues with your Belkin router, then, the only thing left to do is to replace your network adapter. You can search for a compatible one from Belkin website or any other brand as long as it supports Windows 10/8/7.

Sixth Method: Disable IPv6

One of the possible reasons why your Belkin router keeps dropping signal out of the network is that you are using an older model which lacks IPv6 support. Even though any modern device should have IPv6 enabled by default, it still might be problematic for some people if their ISP provides them with an IPv6 connection for their internet. So, keeping this disabled might solve the issue.

Seventh Method: Use USB 3.0 Ports for Network Adapter

If your device’s network adapter supports USB ports, try using it instead of the one built in. Since most routers have below average USB ports which are not well adapted to modern use, it is better to use USB 3.0 ports for network adapters if possible since they have a maximum connection speed of 5 Gbps as opposed to 480 Mbps provided by regular USB 2.0 ports.

Conclusion:

Belkin router keeps dropping out of the network? If yes, then, try following the methods discussed above and see if that solves the problem. If you have anything to add, feel free to do so by commenting below.